Random design variations of hollow-core anti-resonant fibers: a Monte-Carlo study

Abstract

Hollow-core anti-resonant fibers (HC-ARFs) have earned great attention in the fiber optics community due to their remarkable light-guiding properties and broad application spectrum. Particularly nested HC-ARFs have recently reached competitiveness to standard single-mode fibers (SMFs) in theory and even outperform them in certain categories. Key to their success is a precisely fine-tuned geometry, which inherently leaves optical characteristics highly susceptible to minimal structural deviations. When fabricating fibers, these come into play and manifest themselves in various imperfections to the geometry, ultimately worsening the fiber performance. In this article, for the first time to the best of our knowledge, these imperfections are statistically modeled and analyzed on their impact on the propagation loss in a Monte-Carlo fashioned simulation. Randomly varying outer and nested tube wall thicknesses as well as random tube angle offsets are considered. It is observed, that the loss increase caused by angular offsets dominates over varying tube thicknesses by approximately one order of magnitude for FM and two orders of magnitude for HOM propagation at a wavelength of 1.55μm. Moreover, the higher-order-mode-extinction-ratio (HOMER) is proportional to the intensity of structural variations, indicating an increase in the ‘single-modeness’ of a fabricated fiber. Furthermore, a bend condition worsens the loss contribution of both effects applied jointly dramatically to a value of +50% at a bend radius of 4cm compared to +7% for a straight fiber. We believe that our thorough investigations on the random structural perturbations of HC-ARFs will aid in fully exploiting to predict the performance of realistic HC-ARFs after fabrication.

Md Selim Habib

Assistant Professor of Electrical Engineering

Hollow-core fibers; Fiber sensors; Ultrafast nonlinear optics